Jeff Watson


Jeff-Watson.Com

Official Debut On:
December 04, 2007


:: THE GUITAR PAGE ::

Electric & Acoustic Guitars, Basses, & Various Stringed Instruments

Page Updated: January 21, 2012

Saturday, January 21, 2012

Martin SWD-RB
Category: GUITARS

The last acoustic guitar I purchased was this Martin SWD-RB (red birch), 6-string acoustic. Made in Nazareth, Pennsylvania U.S.A. in 2004. Dreadnaught size. Back and sides of red birch. Solid Sitka spruce top, tortoise binding, layered black/white rosette ring, beveled & polished tortoise pickguard, 45-style mosaic backstrip. Solid cherry neck with low oval profile, katalox fretboard & bridge, white pearl position dots, 25.4" scale, 1 11/16" nut width, gold enclosed tuners, complete gloss body finish. All woods (except top & braces) are from forests certified by the Smartwood Program of the Rainforest Alliance to comply with environmental, social and economic standards. Top & braces are from good Sitka spruce logs rescued on their way to the pulp mills. Approximate retail price; $1849.00.•



Construction:
TopSolid Sitka Spruce
NeckCherry
FretboardKatalox
BridgeKatalox
BackRed Birch
SidesRed Birch
TunersEnclosed Tuning Machines (gold)
Specifications:
InlaysPearl Dot Position Markers
WarrantyLifetime

Monday, December 31, 2007

My Johnson Acoustic
Category: GUITARS

Johnson Clarity Series JG-658 Squareback, 6-string acoustic/electric. Approximate retail price; $246.99.•



Construction:
TopSpruce
NeckMahogany
FretboardRosewood
BridgeRosewood
BackPlastic Resin Squareback
TunersDie-Cast Tuning Machines
Specifications:
InlaysSnowflake Position Markers
ElectronicsFishman Transducer Pickup w/ 4-Band EQ
WarrantyLifetime


Saturday, October 08, 2011

Fender Stratocaster
Category: GUITARS

Fender Stratocaster Contemporary Standard '22' B-series (1985-86) MIJ (Made In Japan) Manufactured by the FujiGen Gakki Factory. The Fender Contemporary models were the first Fender Japan models to be named Fender Stratocasters Model: 27-4300: 3 single coil pickups made by Fujigen (Alnico, not ceramic), 5 position selector switch, 1 volume, 2 tones, Fender System I tremolo/vibrato made by Schaller in Germany, rosewood fingerboard, 25.5" scale length, top mounted output jack, solid alder body, Olympic White. General features: “D” profile neck with a 12" radius. "BiFlex" truss rod adjustment at the top of the neck. Microtilt neck angle fine adjustment. 22 medium jumbo frets. Fender Roto-matic tuners. 4-bolt neck plate. 11 screw, 3-ply pickguard. Gotoh string locking.


Saturday, October 08, 2011

Fender Jag-Stang
Category: GUITARS

Fender Jag-Stang. Crafted In Japan 1997.Designed by Kurt Cobain (Nirvana). Part Number: 025-4200(RH). Color: Fiesta Red. Body: Basswood. Neck: Maple. Fretboard: Rosewood (7.25" Radius/184mm). No. of Frets: 22. Scale Length: 24" (609.6 mm). Neck Width @ Nut: 1.5625" (39.68 mm) Machine Heads: Vintage Style. Pickups: "Vintage Style"(Neck), "Special Design" Humbucker(Bridge). Controls: 1 Master Volume, 1 Master Tone. Bridge/Tremolo: Fender "Dynamic Vibrato" Floating Tremolo. Pickup Switching: 2 pickup On/Off, In/Out Phase.


Thursday, October 13, 2011

Lueez "Fender-style" Stratocaster
Category: GUITARS

I picked this up on 10/12/11. It's a one-of-a-kind Lueez custom strat.Body: Alder, with maple stripes and AAAA maple burl-wood top. Neck: Hard maple with rosewood fingerboard. 21 frets. 25.5" scale. Pick-guard: highly-figured curly-western maple. Inlays: mother of pearl & abalone (stars & planets). Sealed tuners (chrome). SSS configuration (3x G&B single coil pickups). Bridge/tremolo: machined saddles(chrome).


Monday, December 31, 2007

Samick J-Bass
Category: GUITARS

The samick J-Bass (has "J" pickups) was my 1st bass guitar and I got a Yamaha "HUNDRED 115B" bass amp at the same time from a little pawn shop in Bridgeport, OH.


Tuesday, January 03, 2012

Ibanez Gio GRX22
Category: GUITARS

Ibanez Gio GRX Series Model: GRX22 SPECS: Neck Material: Maple Neck Scale/Length: 25.5" Neck Type: GRX, bolt-on, 22-fret Body: Basswood body Frets: 22 Medium frets Fingerboard: Rosewood Inlay: Pearl dot inlay Bridge: FAT 6 bridge NeckPU: PSND1 BridgePU: PSND2 Switching System: 1 Volume, 1 Tone, 3-Way Selector Finishe: BKN (Black Night) Produced in: Indonesia or China? PICKUP DETAILS: Bridge Pickup Name: POWERSOUND Model No: PSND2 Construction: Humbucking Magnet: Ceramic Description: High output with enhanced harmonics. Neck Pickup Name: POWERSOUND Model No: PSND1 Construction: Humbucking Magnet: Ceramic Description: High output in the neck position with no “muddiness.”


Friday, September 09, 2011

Ibanez Talman Inter City
Category: GUITARS

Here's my Ibanez Talman Inter City acoustic/electric.



Monday, December 31, 2007

Kramer V-Neck
Category: GUITARS

This Kramer V-neck bass guitar , has an aluminum neck, V-shaped head stock, a flying V body style, and is somewhat of a rare find. It's been customized a bit, but rather poorly. It could use a restoring. This bass is very "metal" and I found this baby at the Wheeling Outdoor Store (pawn shop).



Monday, December 31, 2007

Dean Edge
Category: GUITARS

This is my favorite bass guitar. For a 6-string it's pretty easy to play. I ordered it on Ebay way back and if I remember right, I think it came from Hawaii. Anyways it is purple which we all know is a sign of gayness, but when I bid on it on Ebay I could have sworn it was a deep blue... Oh well, it's still cooler than you.



Thursday, September 08, 2011

Dean Edge Hammer 5-String Bass (Mahongany)
Category: GUITARS

This is the latest addition to my bass collection. Dean Edge Hammer 5-String Bass. Features: Two-octave, bolt-on, Mahogany neck with rosewood fingerboard and Dean bass clef inlay. Grover tuners. Solid Mahogany body with natural oil finish. Heavy-duty black hardware. Pair of "soapbar" high-output humbucking pickups wired in parallel. 2-Band Active EQ.



Thursday, September 13, 2011

Dean Evo Special
Category: GUITARS

I just purchased this Dean Evo today (Sept. 13th). Dean Evo Special Select. Features: Arched Flame Maple Top (Transparent Blue), Fully Bound Honduras Mahogany Body, Set Honduras Mahogany Neck, Rosewood Fingerboard, 22 Frets, 24-3/4" Scale & 1-11/16" Nut, Abalone Dot Inlays, Grover Tuners, Nickel Hardware, Dean Humbucker Pickups, Neck pickup upgraded to Seymore Duncan, Tune-O-Matic Bridge.



Saturday, January 14, 2012

Epiphone Les Paul Standard "Plus Top"
Category: GUITARS

Here's my 1st guitar purchase of 2012. Epiphone Les Paul Standard Plus Top. According to the serial # it was made in October 2008 in DeaWon or Unsung factory China and is #148. Features: Solid mahogany body, Flamed maple veneer over carved top, Set mahogany neck, Slim-tapered neck, 22-fret rosewood fingerboard, 24-3/4" scale, 1-11/16" nut width, Alnico Classic humbuckers, LockTone Tune-O-Matic bridge and stopbar tailpiece, Cream body and fretboard binding, Chrome hardware, Grover tuners, and Honeyburst finish.



Monday, December 31, 2007

Galveston
Category: GUITARS

This 1 isn't really mine, but it almost was. Anyways my brother ordered 2 bass guitars on Ebay and I was going to buy 1 but purchased my Dean instead. This 1 was never really played and he might sell it if offered.



Monday, December 31, 2007

Crate Blue Voodoo
Category: GUITARS

My Crate Blue Voodoo (BV 120) half stack. This baby cranks out 1 bazillion jiggawatts RMS per channel through 4, 12-inch Celestion speakers. Shoot that's loud.


Thursday, September 08, 2011

Hondo
Category: GUITARS

I finally took a pic of my actual Hondo Les Paul copy after all these years. Unfortunately it's in the same condition as the day i bought it.The previous owner sanded off the original black paint and did a rather poor job of it, & the wiring is all tore up.


Tuesday, January 01, 2008

ESP LTD F-200
Category: GUITARS

This is where the writeup about my ESP LTD F-200 will go someday when I have time.


Wednesday, September 07, 2011

ESP LTD M-100
Category: GUITARS

This is where the writeup about my ESP LTD M-100 will go someday when I have time.


Wednesday, September 07, 2011

Yamaha RBX270
Category: GUITARS

Yamaha RBX270 4-String Bass. 35" scale, two-octave maple neck with abalone inlays on rosewood fingerboard. Solid alder body, "mist green". Volume, pickup selector and tone knobs. P-bass neck & J-bass bridge pickups.


Saturday, September 10, 2011

Teisco Del Rey
Category: GUITARS

This is a late 60's era Teisco Del Rey Model EV-2T, which is a replica of the Vox Phantom.


Friday, September 12, 2011

Kay Model No. KCK 365
Category: GUITARS

Here's some turd piece of crap I forgot about in my collection. It's a classical / Spanish style acoustic that I've had strung up with steel strings for who knows how many years. It was made in Korea so you know it's of high quality.


Tuesday, October 11, 2011

Mountain Dulcimer
Category: GUITARS

This teardrop-shaped flathead Dulcimer was handmade by Harvey Hines in Moundsville, WV in 1989.


Tuesday, January 3, 2012

Peavey T-60
Category: GUITARS

Peavey T-60. Made In Meriden, Mississippi, USA 1983

The T-60, designed by Hartley Peavey and Chip Todd, was the 1st guitar Peavey produced. The "T" in T-60 stands for Todd. They were made between 1977 through 1987. They were the 1st CNC machined guitars. Mine has the "blade" pickups (hot rail style pickups 1st introduced in 1981) as opposed to the original "toaster" style pickups.

Specs: 2 double coil blade pickups, 2 volume, 2 tone, 3-way pickup toggle switch, phase switch, special tone circuit that turns the pickups into single coil, 12" neck radius, 25-1/2" scale length, 21 medium frets, rock maple fingerboard, northern ash body


Friday, September 12, 2011

Peavey Mantis
Category: GUITARS

The Peavey Mantis, made in the good ol' USA, was 1 of my firts real electric guitars. I got this at the Outdoor Store about a million years ago. Whoever owned it before me thought it'd be a swell idea to cut the pickguard up and put a funky Floyd Rose tremelo bar on it. A few years later Dimebag Darrell wanted to be like me and started using Deans with a very similar shape. The Peavey is still the best though.


Tuesday, January 01, 2008

BC Rich Warlock
Category: GUITARS

B.C. Rich Warlock, N.J. Series (Made in Nagoya, Japan), Date: Unknown (probably 80's), Neck: Maple, rosewood fretboard, bolt-on, 24 frets, diamond inlays, Pickups: 2 Unknown Humbuckers (Dimarzios?), Floyd Rose Licensed Tremolo SFT-70A. This BC Rich Warlock NJ Series was 1 of my most prized possessions for years. It's just so freakin' metal!